What FBR published from 23 to 30 October 2026
The Federal Board of Revenue issued nine final or operative instruments in this review window: four Customs duty-drawback notifications, one final Income Tax rule, three Sales Tax General Orders and one Customs General Order. It also published three draft notifications for public comment.
The dates below are the dates printed on the underlying official documents. The four drawback schedules and the integration-credit rule are final notifications. STGO 30, STGO 31, STGO 32 and CGO 07 are operative orders. S.R.O. 1905, S.R.O. 1912 and S.R.O. 1913 expressly remain drafts or proposed amendments and are not presented here as current rules.
Four replacement export duty-drawback schedules
S.R.O.s 1908, 1909, 1910 and 1911(I)/2026 are all dated 27 October 2026 and apply to exports from that date onwards. They replace the long-standing 2009 notifications for four groups of goods:
- S.R.O. 1908 replaces S.R.O. 209(I)/2009 for textile and allied products.
- S.R.O. 1909 replaces S.R.O. 210(I)/2009 for leather and allied products.
- S.R.O. 1910 replaces S.R.O. 211(I)/2009 for engineering and allied products.
- S.R.O. 1911 replaces S.R.O. 212(I)/2009 for miscellaneous products.
Each notification contains detailed product, raw-material, PCT and repayment schedules. The rates are not a single sector-wide percentage: they vary by listed product and may be expressed as a percentage of f.o.b. value or as a unit amount. Exporters should therefore use the exact schedule entry rather than a headline sector label.
The four notifications share important claim conditions. The goods must be exported from Pakistan, the exporter must declare the drawback claim on the goods declaration and related export documents, and the repayment application must normally reach the proper Customs officer within 210 days of export or within 180 days from realization of foreign exchange shown on the Bank Credit Advice.
Final integration tax-credit rule
S.R.O. 1904(I)/2026, dated 26 October, inserts rule 33U into the Income Tax Rules, 2002. It is the final version of the integration-credit proposal previously published through S.R.O. 1692(I)/2026.
A person claiming the section 64D tax credit must be required to integrate with FBR's computerized system for real-time production monitoring or sales or receipt reporting. The relevant electronic resource must be acquired, installed, integrated and configured during the tax year, used directly and exclusively for the required integration, supported by system-generated activation evidence and backed by acquisition and payment records.
The amount actually invested can include the purchase price and one-time costs directly needed for installation, configuration, interface development, integration, testing and implementation. It must be reduced by discounts, rebates, refunds, grants or subsidies. Refundable taxes, routine maintenance, recurring support, connectivity, utilities, salaries, training, consumables, financing and general-purpose components are excluded unless a separately identifiable component is dedicated exclusively to the integration. The credit is claimed in the return for the tax year in which successful integration occurs, cannot be claimed twice and remains subject to Commissioner verification.
Textile-spinning video monitoring by 15 November
Sales Tax General Order No. 30 of 2026, dated 23 October and effective immediately, extends video monitoring beyond baled cotton to natural, man-made and blended fibres processed in loose, opened or other non-bale forms by registered textile spinners.
The order identifies monitoring points such as hopper openers and feeders, blending feeders, man-made-fibre blow-room lines, waste or recycling lines, and mixing or laydown areas. Registered persons must arrange installation of the required cameras by 15 November 2026. Authorized vendors must integrate the cameras with video-analytics solutions capable of real-time capture, object detection and counting, production analysis, unexpected-stop detection, archiving and transmission to FBR's Central Control Unit. STGO 08 of 2025 remains in force alongside the new order.
Captive-power steel payment procedure effective from 1 July
Sales Tax General Order No. 31 of 2026, dated 29 October, prescribes how steel manufacturers covered by the captive-power or self-generation limb of S.R.O. 1245(I)/2026 must pay and adjust the additional Sales Tax based on electricity units consumed. The order states that it takes effect from 1 July 2026.
For each tax period, the registered person must calculate the liability from electricity units consumed, generate the dedicated PSID challan and deposit the amount by the fifth day of the following month. After CPR verification, the amount is reflected in `STR-7` row 23c, with the equivalent adjustment in row 1a. No entry or adjustment is allowed without the matching payment and verified CPR. Records of electricity generated and consumed must be maintained, while the relevant Commissioner may verify the units and field formations must monitor payment.
The order sets a payment and return-reporting procedure; it does not change the rate stated in S.R.O. 1245(I)/2026.
Tyre-production monitoring by 30 November
Sales Tax General Order No. 32 of 2026, dated 30 October and effective at once, requires registered tyre manufacturers to install, integrate and operationalize electronic production monitoring at every curing press and at the takeaway conveyor or finishing line by 30 November 2026.
The system must distinguish valid production from dry, maintenance and warm-up cycles and from green or uncured tyres, count cured tyres and identify each stock keeping unit using the approved diameter, width, tread design or pattern and weight data. The order also requires real-time records, secure transmission, tamper and failure reporting, audit trails and production analytics.
The annexed manufacturer list is expressly non-exhaustive. A registered tyre manufacturer is not outside the order merely because its name is absent. Once the monitoring requirement applies, tyres may not be removed from the business premises unless their production has undergone the prescribed monitoring.
Customs classification-dispute timelines
Customs General Order No. 07 of 2026, dated 27 October, amends the methodology for settling classification disputes under CGO 12 of 2002. For cases provisionally assessed under section 81 of the Customs Act, the amended text introduces a 90-day period where the existing methodology uses 120 days for other cases. This timing amendment takes effect on 1 January 2027.
The order also adds an appeal route: a person aggrieved by a classification decision may appeal to FBR under Rule 2 of the General Rules for Interpretation of the First Schedule to the Customs Act within 30 days after the Public Notice is issued.
Three proposals remain drafts
Three official documents in the same window invite objections or suggestions and must not be treated as final law as of 2 November 2026:
- Draft S.R.O. 1905(I)/2026, dated 26 October, proposes wider functions and procedures for faceless Income Tax assessment units, including best-judgment, amended, provisional, appellate-effect and rectification proceedings. It allowed three days for comments after Gazette publication.
- Draft S.R.O. 1912(I)/2026, dated 27 October, proposes that companies submit Tax Year 2026 and later financial statements through IRIS in an electronically readable format and use secure electronic authentication. It allowed seven days for comments.
- Draft S.R.O. 1913(I)/2026, dated 27 October, proposes a 72-hour pre-arrival vessel-intimation requirement, related exceptions for specified loading ports and a PKR 500,000 fine where the proposed timing is not met. It allowed seven days for comments.
FBR's S.R.O. register showed no final replacement for any of these three proposals when checked on 2 November.
Other official channels checked
FBR's 29 October press release on Faceless Customs Assessment describes the relocation of the assessment function, reports operational performance and sets out proposed service timelines. It is an official policy and operational statement, not a notification that turns the proposed timelines into binding tax rules. The 31 October extended-hours notice is administrative and does not change a filing date or tax liability. No newer material Income Tax, Sales Tax, Federal Excise or Customs circular was found in the official registers for this review window.
What affected businesses should check
- Exporters should map each product to the exact PCT and schedule entry in S.R.O. 1908, 1909, 1910 or 1911 before calculating a drawback claim.
- A claimant under section 64D should separate eligible one-time integration costs from excluded recurring or general-purpose expenditure and retain the system activation evidence.
- Textile spinners and tyre manufacturers should confirm every covered production point, the applicable implementation date and the vendor or system requirements in the relevant STGO.
- Captive-power steel manufacturers should reconcile electricity-unit records, the special PSID and CPR, and the two specified `STR-7` rows for each affected tax period.
- Parties to classification disputes should distinguish the 1 January 2027 timing change from the immediately available 30-day appeal route.
- The three draft S.R.O.s should be monitored for a final notification before anyone changes a filing or operational process on their basis.
Official FBR sources
- S.R.O. 1904(I)/2026 dated 26 October 2026 - final conditions for the integration tax credit
- S.R.O. 1908(I)/2026 dated 27 October 2026 - textile and allied export drawback schedule
- S.R.O. 1909(I)/2026 dated 27 October 2026 - leather and allied export drawback schedule
- S.R.O. 1910(I)/2026 dated 27 October 2026 - engineering and allied export drawback schedule
- S.R.O. 1911(I)/2026 dated 27 October 2026 - miscellaneous export drawback schedule
- Sales Tax General Order No. 30 of 2026 dated 23 October 2026 - textile-spinning video monitoring
- Sales Tax General Order No. 31 of 2026 dated 29 October 2026 - captive-power steel payment and adjustment procedure
- Sales Tax General Order No. 32 of 2026 dated 30 October 2026 - tyre-production monitoring
- Customs General Order No. 07 of 2026 dated 27 October 2026 - classification-dispute methodology
- Draft S.R.O. 1905(I)/2026 dated 26 October 2026 - proposed faceless Income Tax assessment changes
- Draft S.R.O. 1912(I)/2026 dated 27 October 2026 - proposed electronic company financial statements
- Draft S.R.O. 1913(I)/2026 dated 27 October 2026 - proposed vessel-intimation timing changes
- FBR press release dated 29 October 2026 - Faceless Customs Assessment operational clarification
The bottom line
The week's final measures affect exporters, integration-credit claimants, textile spinners, captive-power steel manufacturers, tyre producers and parties to Customs classification disputes. The most immediate implementation dates are 15 November for textile-spinning cameras and 30 November for tyre monitoring. The three separately identified proposals remain drafts until FBR issues final instruments.
Disclaimer: This article summarizes official FBR documents reviewed on 2 November 2026. It is general information, not individualized Income Tax, Sales Tax, Customs, export, manufacturing, filing or legal advice. Check the current law, the exact instrument, your facts and any later amendment before acting.
